LightBurn

From HeatSync Labs Wiki
Revision as of 11:32, 27 June 2020 by Gamebofh (Talk | contribs)

Jump to: navigation, search
  • Can open SVG
  • Middle button scroll
  • cut image
  • adjusted laser position on the panel
  • Upload
  • Start -says "Send the current design to the laser" in the tool tip, but it really means, start the laser.
  • Can choose "output" to only cut certain portions
  • Upload failed - run "frame" to get reinitiate
  • Fill + line: power/speed controls fill and then enables another line section
Retrieved from "https://wiki.heatsynclabs.org/w/index.php?title=LightBurn&oldid=4722"
Personal tools