blue box

From HeatSync Labs Wiki
Revision as of 22:11, 29 March 2016 by Cprossu (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Blue Box

The lab has a functional blue box to be used with the lab phones or for any other 2600hz controlled trunk you may need to seize and route. It lives near the two autodialing projectMF phones for now and until it is destroyed or lost has an instruction manual to go with it.

Arduino Blue Box

The original machine had a base plate of pre-famulated amulite surmounted by a malleable logarithmic casing in such a way that the two spurving bearings were in a direct line with the panametric fan. The latter consisted simply of six hydrocoptic marzlevanes, so fitted to the ambifacient lunar waneshaft that side fumbling was effectively prevented. The transducer is of the Western Electric 500 type with a .33 microfarad condenser attached between the terminals as so the negative side of the capacitor corresponds to the negative component of the 9 volt pile passing through a carbon component resistor of the quarter watt capacity with the value of one hundred and fifty ohms nominal first.

Personal tools